Wholesale Pool Cleaners & Pool Vacuum Cleaner Manufacturer OEM, ODM and private-label supply for distributors, importers and pool service companies
We are a pool vacuum cleaner manufacturer supplying wholesale pool cleaners factory-direct to trade buyers. Tell us which pool floors your market installs and we confirm the model line-up, the MOQ for that configuration and the landed-cost components — not one price for every destination.
The short answer for wholesale pool cleaner buyers
When you buy wholesale pool cleaners, specify for the pool floors your market actually installs rather than for the highest suction figure. This range is supplied factory-direct to trade buyers, every model is IPX8 rated for continuous immersion, and the specification that separates a unit which prevents complaints from one which causes them is filtration rating, not suction.
- Above-ground flat-bottom pools, leaves and sand: coarse-basket filtration is sufficient; no need to pay for fine mesh.
- In-ground pools where silt and algae return: specify filtration down to 0.1 mm — this is the specification that resolves the repeat complaint.
- Serving both pool types from one line item: choose the above-ground and in-ground band, with floor coverage up to 120 m².
- OEM and private label: branded units, custom packaging and documentation, and functional specification changes are all supported. Send your requirement and we confirm exactly what applies to your configuration — including whether any tooling is involved.
- Commercial terms: MOQ is confirmed per configuration as a pool cleaner supplier, sample units are available before production, and branding, packaging and documentation are confirmed in writing with the quotation.
Confirm before production: IPX8 immersion rating, plug type and voltage for your destination market, and the battery transport requirements that apply to your shipment.
Buyer profiles
Who we supply: pool cleaner distributors, importers and service companies
Orders are structured around how you resell, not around a single published price tier. The same wholesale pool cleaners are supplied to trade buyers with different volumes, different documentation needs and different packaging requirements.
Pool cleaner distributors & importers
Volume pricing across a mixed container, structured around the model mix you want to carry as a pool equipment distributor.
What we need from you: destination market, expected annual volume, model mix.
Pool service companies
Units specified for recurring maintenance contracts, where silt and algae are the complaint that keeps coming back rather than leaves and sand.
What we need from you: the debris profile you actually see, and floor coverage per site.
Pool retailers & e-commerce sellers
Retail-ready cartons and inserts, plus white-label branding for marketplace listings, supplied as bulk pool cleaners rather than single units.
What we need from you: your sales channel and whether you need retail-ready cartons.
Hospitality & commercial operators
For hotels, resorts and commercial pool facilities — a commercial pool cleaner that replaces a labour line item with an unattended floor pass.
What we need from you: pool count and floor construction, and the maintenance window you work in.
OEM & private-label brand owners
Your logo, housing colour, carton and manual — or a functional change to differentiate an OEM pool cleaner under your own brand.
What we need from you: customisation level, artwork status, and target launch window.
Pool builders & installers
Units bundled into a new-build or renovation package, specified against the floor type being installed rather than a general-purpose model.
What we need from you: the floor types you install and the annual project volume.
Sourcing decision 1
Match the unit to the pool floor before you quote
The range is organised by pool floor rather than by model number, because the floor is the variable your market buys for. Tell us which of these floors you install or service, and the line-up for that floor is confirmed with the quotation.
Above-ground · flat bottom
Above-ground pools, flat liner
The largest retail and distributor category: uniform depth, no hopper, shallow walls.
Typical requirement: coarse-basket filtration, liner-safe drive, 100–120 min runtime class.
In-ground · flat bottom
In-ground pools, uniform depth
Concrete or liner floor with no deep end to work around — the segment where silt drives repeat service calls.
Typical requirement: filtration to 0.1 mm, coverage up to 120 m².
Above-ground & in-ground
Both floor types, one line item
For distributors serving both customer types who want to carry a single SKU across a mixed container.
Typical requirement: dual-floor specification, 110–180 min runtime class, 120 m² coverage.
Brush-led cleaning
Algae film & biofilm
Where a film has bonded to the liner, suction alone will not shift it — brush action is the specification that decides the outcome.
Typical requirement: brush, rinse and suction in one pass.
No model in the range cleans pool walls or the waterline. If your market asks for wall cleaning, raise it in the enquiry and we confirm whether it is possible for that configuration rather than let you discover it after the order. The models specified for each floor — including the robotic pool cleaner range — are listed on the category page.
Sourcing decision 2
Filtration decides what a wholesale pool cleaner picks up — not suction
Manual brushing reaches the floor but misses the corners, and sediment that is stirred up rather than removed settles back onto the liner and keeps raising chemical consumption for the end user. Leaves and sand are the easy test. Silt and algae are the test that decides whether the unit is reordered.
What each filtration specification stops
Same immersion rating, same drive concept — the difference is the filter mesh. That is why a higher suction figure on a coarse-basket unit does not resolve a silt problem.
| Debris | If it stays | Specification required |
|---|---|---|
| Leaves & large debris | Blocks circulation, loads the pump basket | Coarse basket filtration |
| Sand & grit | Settles on the floor, abrasive on liners | Coarse basket, with a full floor pass rather than spot cleaning |
| Silt & fine sediment | Clouds the water, drives up chemical use | Fine filtration to 0.1 mm |
| Algae film | Returns within days if the floor is not scrubbed | Brush action combined with fine filtration |
Sourcing decision 3
Pool cleaner supplier: range capability by pool floor
Capability is listed by pool floor and specification band rather than by model number, because the line-up grows. The current models and their live specifications are listed on the category page, which is updated as the range changes.
| Pool floor | Filtration | Runtime class | Floor coverage | Sourcing note |
|---|---|---|---|---|
| Above-ground, flat bottom | Coarse basket | 100–120 min | Full floor pass | Highest-volume retail band; liner-safe drive is the specification to confirm |
| In-ground, flat bottom | Fine, to 0.1 mm | 110–180 min | Up to 120 m² | Specify fine filtration where silt and algae drive repeat service calls |
| Above-ground & in-ground | Coarse and fine options | 110–180 min | Up to 120 m² | One line item across a mixed container for distributors serving both segments |
| Bonded algae film | Fine, with brush action | 100–180 min | Full floor pass | Brush, rinse and suction in one pass; suction alone does not resolve a bonded film |
| Spa, hot tub & wide steps | To be confirmed per footprint | — | Base only | Send the footprint before quoting; reach around steps is configuration-dependent |
Compare the current pool vacuum cleaner models
The category page is the live reference for the model list; as a pool cleaner manufacturer we describe what the range is specified to do, so this page stays accurate as the line-up changes.
Product pages
Pool vacuum cleaner models in the current range
Each model is specified for a floor band. Open the product page for the full technical data, or send us the floor types you install and we recommend the line-up for your market.
ST-BP1 automatic pool floor vacuum
Lowest landing cost in the range for price-led retail and first orders.
Above-ground · flat bottomST-SP1 cordless pool vacuum
Entry band for above-ground flat-bottom pools, 4500 mAh battery.
Brush-led cleaningST-SP1X pool vacuum with brush and rinse action
Three-action brush, rinse and suction in one pass for fine silt.
Above-ground & in-groundST-SP2 dual-floor pool vacuum
Dual-floor band with 0.1 mm fine filtration for silt and algae.
In-ground · flat bottomST-SP2X flat-bottom pool vacuum
Fine filtration, 110–180 min runtime and the widest coverage band.
Specification in operation
A cordless pool vacuum running a full floor pass
Filtration pickup, drive behaviour on a liner and runtime under load are the three things a specification sheet cannot show a buyer. This is a unit running a complete floor pass on a flat-bottom pool.
Sample units are available before a bulk commitment, so the same three points can be validated on a real pool before the order is placed.
Commercial terms
Wholesale and OEM order terms, stated before you enquire
Most sourcing delays come from terms that were never written down, not from the product. As a pool cleaner manufacturer we confirm these terms in writing with every wholesale pool cleaner quotation.
MOQ & bulk pricing
Confirmed per configuration rather than published as one headline number — the minimum depends on model mix, customisation level and packaging.
Sample orders
Sample units are available before a production commitment so runtime, filtration pickup and drive behaviour can be validated first.
Lead time
The production schedule is quoted with the price. It is fixed once artwork approval and deposit are in place, so the launch date is not a guess.
Incoterms & landed cost
State the Incoterm your finance team works with and we quote the components that matter to your landed cost, rather than an ex-works figure alone.
Payment terms
Payment structure is agreed in writing with the quotation and stated alongside the production schedule.
Packaging & container loading
Retail-ready cartons, inserts and manuals, plus a loading plan that matches the container type you are booking.
OEM & private label
Three levels of customisation for an OEM or private-label pool cleaner
A pool vacuum cleaner is sourced one of two ways: ready units from stock, or a private-label programme. Buying through a pool cleaning robot manufacturer rather than a trader removes the second margin on the same unit. Each level below may add engineering work, so tell us which route you are buying before the enquiry — we confirm the requirements and lead time for your configuration.
Branding
Printed logo on the unit, labels, and a custom housing colour.
Supported. Tell us the branding you need and we confirm the requirements and lead time for your configuration.
Packaging & documentation
Retail-ready cartons, inserts and manuals for your retail channel.
Where most private-label programmes start. The fastest route to a higher perceived value at retail.
Functional customisation (ODM)
Changes to the specification itself — filtration, runtime targets, brush configuration.
Supported. Confirm the specification you want and we confirm what the change involves before you commit.
Compliance
Compliance and how a wholesale order runs
A pool vacuum cleaner is not a dry-land appliance used near water. It works submerged, continuously, on a lithium-ion battery — which changes what a buyer has to verify before the container ships, and it is the part of the purchase that cannot be repaired afterwards.
| Item | What applies | Why it matters at the port |
|---|---|---|
| Immersion rating | IPX8 across the range | IPX8 is the rating that reflects continuous immersion — “water-resistant” does not describe how the machine is actually used |
| Battery transport | Lithium battery shipments carry transport requirements | Requirements differ by cell configuration and are the most common cause of a held shipment — raise it before the order is placed |
| Voltage & plug | Confirmed for your destination market | Confirm plug type and voltage before production, not after |
Four steps from first enquiry to purchase order
Send your requirement
Destination market, pool floors you serve, expected annual volume, customisation level and the Incoterm your finance team uses.
Receive the written quotation
Unit price, MOQ for your configuration, landed-cost components, payment structure and the production schedule.
Validate a sample unit
Check runtime under load, filtration pickup and drive behaviour on a real pool before the bulk commitment.
Approve and produce
Artwork approval and deposit fix the schedule, and production then follows the specification you approved.
Sourcing resources
Guides for buyers sourcing wholesale pool cleaners
Pool Vacuum Cleaner Buying Guide
The full sourcing decision — the unit types, the specifications that decide performance, debris profile, and what to verify before a bulk order.
Battery, Runtime & IPX8 Specifications
What the battery capacity classes, runtime bands and IPX8 immersion rating mean in service — and the specifications worth verifying before ordering.
Wholesale & OEM questions
Answers for wholesale buyers, not for browsers
Product specifications and the live model line-up are on the category page. These are the questions that decide whether an order for wholesale pool cleaners runs smoothly.
Are you a pool vacuum cleaner manufacturer or a trading company?
We manufacture the range and supply it factory-direct to trade buyers. Units are produced on our own line, and the specification you approve before production is the one that ships.
What is the MOQ for wholesale pool cleaners?
MOQ is confirmed per configuration rather than published as one headline number, because it depends on model mix, customisation level and packaging. Send the destination market and your expected annual volume and we confirm the terms for that case in writing.
Do you supply bulk pool cleaners to distributors and importers?
Yes. Above-ground flat-bottom pools are the highest-volume band in the range, and bulk and container-load orders are quoted for pool cleaner distributors, importers and retail chains.
Can we order a private-label pool cleaner under our own brand?
Yes — custom logo, housing colour and retail-ready cartons. Tell us the branding you need and we confirm the requirements and lead time for your configuration.
What is the lead time for an OEM pool cleaner order, and what should we confirm first?
Lead time is quoted with the price and fixed once artwork approval and deposit are in place. Before the order, confirm the IPX8 immersion rating, the plug type and voltage for your destination market, and the battery transport requirements that apply to your shipment.
Do you supply commercial pool cleaners for hotels and resorts?
Yes. Commercial and hospitality buyers order the same range for unattended floor passes across multiple pools, usually with a mixed-model container and a service-parts allowance.
Do these units clean pool walls and the waterline?
No. Every unit in the range is a floor cleaner: it cleans the pool floor and does not clean walls or the waterline. If your market requires wall cleaning, raise it in the enquiry and we confirm whether it is possible for that configuration.
Request a wholesale quotation for your market and configuration
Send these points and you receive a written quotation — unit price, the MOQ for your configuration, landed-cost components, payment structure and the production schedule.
1 · Destination market
Country or region, plus the plug type and voltage you require.
2 · Pool floors you serve
Above-ground, in-ground or both, and the floor construction.
3 · Expected annual volume
This is what sets your MOQ and price tier.
4 · Customisation level
Branding, packaging and documentation, or functional ODM changes.
5 · Incoterm & packaging
The Incoterm your finance team uses, and whether you need retail-ready cartons.
6 · Still qualifying?
Send the market and volume only — we recommend a line-up and confirm MOQ.