T13 Max Cordless 3-in-1 Wet Dry Floor Washer — Vacuum, Mop and Wash in One Pass
The T13 Max is a cordless 3-in-1 wet dry floor washer that combines vacuuming, mopping and washing in a single pass on hard floors. A 250W brushless motor running at up to 110,000 rpm produces 20,000 Pa peak suction, so dry debris such as crumbs, dust and sand and liquid spills such as milk and juice are lifted in the same movement instead of being pushed across the surface.
For brand owners, wholesale distributors and cross-border e-commerce operators, the commercial value sits in the specification rather than the marketing: LED dust detection that makes invisible fine dust visible on the floor, chemical-free electrolytic water sterilization rated at 99.9%, a self-propelled assist that takes the physical effort out of cleaning large areas, and an original private mold that is not available to other manufacturers. The result is a differentiated SKU rather than another commodity wet dry vacuum.
Technical Specifications
| Model | T13 Max |
|---|---|
| Product type | Cordless 3-in-1 wet dry floor washer (vacuum + mop + wash) |
| Rated power | 250 W |
| Motor | 110,000 rpm high-speed brushless motor |
| Suction power | 20,000 Pa peak (18–20 kPa) |
| Battery capacity | 4400 mAh lithium-ion (10 cells) |
| Working time | Up to 55 min in Eco mode; 33 min in Strong mode |
| Charging time | 4–5 hours |
| Adapter | Input 100–240 V; output DC 22 V |
| Clean water tank | 600 mL |
| Dirty water tank | 600 mL (separate, with solid-liquid separation) |
| Floor coverage | Up to 200 m² per full charge |
| Cleaning speed | 1100–1200 scrubs per minute |
| Dust detection | LED optical dust detection light |
| Sterilization | Electrolytic water sterilization, 99.9% (based on lab testing) |
| Self-cleaning | One-touch self-cleaning with full-path washing from roller brush to pipeline |
| Drying | Negative-ion centrifugal air drying at normal temperature |
| Display | Smart LED digital display (battery level, mode, working status) |
| Voice prompt | Intelligent voice guidance and alerts, with independent on/off switch |
| Roller brush | Anti-tangle roller brush, pre-installed |
| Cleaning design | Zero-gap edge-to-edge cleaning |
| Assist function | Self-propelled assist |
| Working modes | Eco mode / Strong mode (2 gears) |
| Spray | Manual and automatic spray |
| Filtration | HEPA filter |
| Noise level | ≤ 74 dB |
| Compatible floor types | Hardwood, marble, tile, laminate, concrete |
| Application | Household, hotel and commercial hard floors |
| Net / gross weight | 4.8 kg / 7.8 kg |
| Product dimensions | 275 × 270 × 1085 mm |
| Package dimensions | 655 × 345 × 315 mm |
| Material | ABS injection moulding |
| Base station functions | Storage, fast charging and self-cleaning |
| Mold | Original private mould |
| Certifications | CE, GS, CCC, CB, PSE |
| Customization | OEM, ODM, custom logo, custom colour, custom packaging |
Core Features
Dual-Tank System: Clean Water and Dirty Water Never Mix
The T13 Max uses two independent 600 mL tanks. Clean water is sprayed onto the roller brush from the clean tank, while the used water is recovered into the dirty tank, so the floor is never wiped with contaminated water. Inside the dirty water tank, a solid-liquid separation structure holds debris apart from the liquid, which makes emptying faster and reduces odour build-up. The clean water tank has an enlarged capacity and a lift-out design: push both sides inward to release the tank for filling or rinsing.
LED Dust Detection Light
An LED optical detection light built into the brush head illuminates fine dust, hair and debris that is hard to see under normal room lighting. Dust sensing works together with dirty water full detection, so the machine reports the real state of both the floor and the tank instead of relying on the operator’s judgement.
Electrolytic Water Sterilization
An electrolysis module inside the clean water tank converts ordinary tap water into an electrolytic cleaning solution in real time. No chemical detergent is added. The sterilization rate is 99.9% (based on lab testing). Because the process is chemical-free, it is suitable for households with pets and children.
One-Touch Self-Cleaning with Full-Path Washing
One button starts the cleaning cycle for the machine itself. The cycle washes and rinses the roller brush, then cleans the full path from the roller brush through to the pipeline and the dirty water tank. There is no need to detach or hand-wash the roller brush after use.
Centrifugal Air-Drying Instead of Hot Air
After self-cleaning, negative-ion centrifugal air drying at normal temperature dries the roller brush and the internal path. This is a cold-air process rather than a heated hot-air dry, and it is designed to prevent mould and odour from developing inside the machine while it is stored on the charging base.
Smart LED Display and Voice Alerts
A smart LED digital display shows battery level, the selected cleaning mode and the current working status in real time. Voice prompts report events such as low battery, a full dirty water tank and entry into energy-saving mode. The voice switch is independent, so the prompts can be switched off when they are not wanted.
Self-Propelled Assist and Edge-to-Edge Cleaning
The self-propelled assist system predicts the direction of travel and drives the machine forward, reducing the physical effort needed to clean large areas. The cleaning head is designed to reach the wall line, so dust and debris along skirting boards and in corners is picked up rather than left behind. The roller brush is an anti-tangle design, and the machine cleans at 1100–1200 scrubs per minute.
Detachable Battery, Two Modes and Upright Standby
The battery pack is detachable and can be removed independently for charging or replacement. Two gears are available: Eco mode for routine cleaning and Strong mode for stubborn stains, with both manual and automatic spray options. The machine stands upright on its own, so cleaning can be paused mid-room without leaning it against a wall. The base station provides storage, fast charging and self-cleaning.
What’s in the Box
- Main unit × 1
- Charging base × 1
- Charger × 1
- HEPA filter × 1
- Cleaning brush × 1
- Roller brush × 1
- Cleaning solution × 1
The roller brush and the HEPA filter are pre-installed inside the unit.
Target Buyers
- Cross-border e-commerce sellers looking for a private-mould cordless floor washer rather than a commodity unit
- Household and hospitality cleaning-goods wholesalers and importers
- Retailers and sourcing partners adding certified OEM hard-floor cleaning equipment to their range
OEM, ODM and Customization
The T13 Max is built on an original private mould, so the tooling is not shared with other sellers in this category. Customization covers logo, body colour and packaging: the unit ships in a brown box by default, and a customized colour box is available for OEM orders. Product category, model number and attribute data are supplied for marketplace listing.
Certifications and Compliance
The T13 Max carries CE, GS, CCC, CB and PSE certification. Operating noise is ≤ 74 dB, which suits residential rooms and hotel guest floors — both of which are listed applications for this model, alongside general commercial hard-floor use.
Frequently Asked Questions
What suction power does the T13 Max produce?
20,000 Pa peak suction, or 18–20 kPa, produced by a 250W brushless motor running at up to 110,000 rpm.
How long does the battery last on one charge?
Up to 55 minutes in Eco mode and 33 minutes in Strong mode, covering up to 200 m² of hard floor per full charge. The battery is a 4400 mAh lithium-ion pack with 10 cells.
How long does charging take?
4–5 hours. The adapter accepts 100–240 V input and outputs DC 22 V. The battery pack is detachable, so a spare pack can be charged separately.
Do I need to add detergent?
No. The electrolysis module in the clean water tank converts plain tap water into an electrolytic cleaning solution, reaching a 99.9% sterilization rate (based on lab testing) without chemical detergent.
How much water do the tanks hold?
600 mL in the clean water tank and 600 mL in the dirty water tank. The two tanks are fully separate, so dirty water is never reused on the floor.
Does it clean its own roller brush?
Yes. One-touch self-cleaning washes and rinses the roller brush and the full internal path, then negative-ion centrifugal air drying dries the brush at normal temperature to prevent mould and odour.
Which floor types can it clean?
Hardwood, marble, tile, laminate and concrete. It is a hard-floor machine; it is not designed for carpets.
Can the voice prompts be turned off?
Yes. The voice switch is independent, so prompts such as low battery, full dirty water tank and energy-saving mode can be silenced at any time.
Is the roller brush prone to tangling with hair?
The roller brush uses an anti-tangle design, and the cleaning head is a zero-gap edge-to-edge design that reaches the wall line and corners.
How loud is the T13 Max?
Operating noise is ≤ 74 dB.
What certifications does the product hold?
CE, GS, CCC, CB and PSE.
Get in Touch
Request the technical datasheet for the T13 Max, or send your inquiry to receive OEM terms and wholesale pricing. Customization options for logo, body colour and packaging can be quoted to your requirement.
Reviews
There are no reviews yet.